Marble Strip & Reseal

Strip & Reseal Marble Floor ^ 9.1 Service Order

SP HSRs STRIP & RESEAL; Stone Floor With:


             [*] Polish Floor GRANOSEAL:   With: 3 Coat Polish
(This quotation is base on above coat but three to five coats are recommended for initial application, for 2 extra coat please add 25% to total amount)
                   Use to Sealing: Marble, Granite, Terrazzo, Slate,Terracotta Tiles/Stone, Concrete & all types of stone

             [*] Sweep the floor first by large broom
             [*] Remove any sticky tape from the floor
             [*] Treat any oil & residue stain
             [*] 1- Strip vinyl floor with ULTRSTRIP
             [] 1- Strip vinyl floor with  GB SUPERSTRIP;
 # GB Powerful stripper that rips through old films of hardened floor polish and rinses away easily leaving floors stripped clean and ready for recoating. With mix recommend amount of stripper with lukewarm water or cold water and apply liberally on the floor with colour coted cotton mop(Red), ensuring that all floor surface is thoroughly wet. Allow 5-7 minutes contact time.
 # ULTRSTRIP, is a powerful stripper that rips through old films of hardened floor polish and rinses away easily leaving floors stripped clean and ready for recoating.
With mix recommend amount of stripper with lukewarm water or cold water and apply liberally on the floor with colour coted cotton mop (Red), mop ULTRSTRIP solution generously over floor and allow 5 minutes to activate.
   Can be used on:
            Vinyl [*]    Linoleum [*]    Slate [*]    Terrazzo [*]    Timber [] 
Application:
    [*]    Medium: Dilution 1 part GB to 10 / Ultrstip 1 to 10-20 part cold water
    []      Heavy: Dilution 1 part GB to  6 / Ultrstip 1 to 5 part cold water

             [*] 2- Scrub floor with black pad under a slow machine to clean easily and efficiently acrylic, wax polish & heavy polish build-ups. By using black pad fitted to an Auto Scrubber or a slow speed rotary machine (Buffing Machine) result will be magnificent and fast.
             [*] 3- After scrubbing pick up slurry with Auto Scrubber or Wet Vacuum
                   Scrub floor by scrubber machine use Autoscrub with below dilutions

Application: Add 1/2 to 10L Bucket of Water
                    Add 1/2 to Scrubbing Machine
     It is low-Foaming Detergent which is packed with powerful grease cutting agents. For industrial, institutional and household cleaning. AUTOSCRUB quickly lifts dirt, spillages, foodstains, smoke films, grease marks and all hard-to-grime from any surface. AUTOSCRUB is specially designed for cleaning floors coated with any sealers: it is gentle on sealers but aggressive at shifting dirt.
             [*] 4- Rinse up floor with well with fresh warm water & inspect floor areas that require further stripping and then mop up floor with PH7 detergent, powerful detergent while it is neutral, biodegradable and phosphate free, it is very effective before polishing floor clean by this detergent to neutralise floor for smooth finished polish.
             [*] 5- Polish floor when is dry with three coat GRANOSEAL: Glossy with extra strong adhesion to stone, hard wearing, non-slip, resists marks & scuffs, buffable & burnishable. Allow to dry completely between each coat to bring best shine & smoothness.

Product: GB UTRSTRIP [*]       GRANOSEAL Polish [*]       PH7 Detergent [*]

Machinery: Slow Buff Machine/Scrubber Machine/Wet & Dry Vacuum/Doodle Bug/Small Black Pad/Bucket & Mop Red/Steel Wool/ Black Pad 40cm/Bucket & Mop Blue/Safety Sign/Stripper Shoes

Aqua-Seal Gold+ 4 Lit

C1 AS Aqua-Seal Gold+ 4Lit

Duro Sealer 20 Liters AGAR

C1 A Duro Sealer 20 Lit AGAR

Duro Sealer 5 Liters AGAR

C1 A Duro Sealer 5 Lit AGAR

STR-36 20 Lit Agar

C1 A STR-36 20 Lit Agar MSDS, Super Con & Pow

STR-36 5 Lit Agar

C1 A STR-36 5 Lit Agar MSDS, Super Con & Pow

Tuff-Gloss 20 Lit Agar Durable Glossy Floor Finish

C1 A Tuff-Gloss 20 Lit Agar Durable Glossy Floor Finish

Tuff-Gloss 5 Lit Agar Durable Glossy Floor Finish

C1 A Tuff-Gloss 5 Lit Agar Durable Glossy Floor Finish