![Show Menu](styles/mobile-menu.png)
![Page Background](./../common/page-substrates/page0020.png)
Page 19 of 34
CARPETED FLOORS
VACUUM CLEANING
SAFETY RULES
Pick up large and sharp items of litter (e.g. pins, paper clips).
Switch machine off before disconnecting from the power point and power switch is off.
Machine must always be fitted in accordance with manufactures instructions.
Check electrical safety of equipment prior to use.
Turn vacuum cleaner off if there are any burning smells or unusual noises and report to
Supervisor.
1. Inspect areas to be vacuumed for spots and stains and treat in accordance with carpet spotting
instructions. Pick up larger objects such as rubbish, paper etc. that should not be vacuumed.
2. Make sure machine is switched off before plugging into power point and power switch is off. Check
that the vacuum has an empty bag. Check filter for cleanliness and electric cord and connection.
3. Commence at the doorway. Using wand, vacuum traffic areas and other areas where visible soil is
present.
4. Empty bag after use, the more dust in the bag, the less effective the machine, the harder the job. Wipe
clean.
5. Store the vacuum cleaner by cleaning the brush on the floor, disconnecting the hose and stowing it
correctly in an orderly manner. (not lying on the ground or in the way of any spills or liquids.)
HAZARDS
Electrocution hazard Power leads to be checked for fraying or exposed wires, any defect to be
reported to Supervisor.
Power leads to be kept behind machine at all times to prevent machine
from cutting or damaging lead.
Do NOT remove plug by jerking or tugging power lead.