97 / 452
ABN 80 004 726 890 | MADE IN AUSTRALIA
Safety Data Sheet
Issued: October 11, 2012
Page 2 of 2
CONCRETE CLEAN
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Clear, pale yellow liquid.
Odour: Acid fume
pH = 0.5 – 1.0
Vapour Pressure: N/K
Vapour Density: N/K
Boiling Point: N/K
Freezing Point: < 0
°
C
Solubility in water: Infinitely miscible
Specific Gravity: 1.05 (20
°
C)
Evaporation rate: As water
% Volatile by vol: > 50%
10 STABILITY AND REACTIVITY
Concrete Clean is stable.
Concrete Clean and its solutions will etch and damage
aluminium, zinc, diecast and other soft metal alloys as well as
terrazzo, limestone and marble. CONCRETE CLEAN should
not be allowed to come into contact with these materials.
Hazardous polymerization: Will not occur.
11 TOXICOLOGICAL INFORMATION
Health Effects:
Acute -
Swallowed: Moderately toxic. Moderately corrosive – causes
burns and desquamation to the mouth, oesophagus and
stomach.
Eye: Moderately corrosive – causes burns and desquamation.
Skin: Moderately corrosive. Irritant to the skin.
Inhaled: Moderately irritative. Moderately corrosive – causes
burns and desquamation to the respiratory tract (including
mucous membranes, throat and lungs).
Health Effects -
Chronic
: No data available.
12 ECOLOGICAL INFORMATION
Ecotoxicity: No data available.
Persistence and degradability: -
Mobility: -
Advice: -
13 DISPOSAL CONSIDERATIONS
For disposal, refer to State Land Waste Management Authority.
14 TRANSPORT INFORMATION
UN No.: 3264
Class: 8 Packg.Group: III Hazchem: 2X
15 REGULATORY INFORMATION
Poisons Schedule Number: Schedule 6
16 OTHER INFORMATION
AICS Listing:
All components of Concrete Clean are listed on
the Australian Inventory of Chemical Substances (AICS).
Date: This SDS issued on October 11, 2012 shall remain valid
for 5 years unless a new SDS is issued in the meantime.
Please contact Agar Cleaning Systems PL to ensure you have
the latest version of this product’s SDS.
Abbreviations and Definitions of terms used:
<
less than
>
greater than
AICS
Australian Inventory of Chemical
Substances
CAS
Chemical Abstracts Service (Registry
Number)
COD Chemical Oxygen Demand
deg C Degrees Celsius
g
gram
g/L grams per litre
HSIS
Hazardous Substance Information System
kg
kilogram
L
Litre
LC50
The concentration of a material (inhaled)
that will be lethal to 50% of the test animals.
LD50
The dose (swallowed all at once) which is
lethal to 50% of a group of test animals.
m3
Cubic metre or cu.m.
mg
milligram
mg/m3 milligrams per cubic metre
miscible A liquid that mixes homogeneously with
another liquid
N/A
Not applicable
N/K
Not Known
NIOSH
National Institute for Occupational Safety
and Health
non-haz Non- hazardous
PEL
Permissible Exposure Limit
ppb
Parts per billion
ppm Parts per million
‘Skin’
Ingredient may be absorbed through the skin
STEL Short term exposure limit
TLV
Threshold Limit Value
TWA
Time Weighted average
UN
United Nations (Number)
wt
weight
The information in this Data Sheet is based on our present
knowledge. However, this shall not constitute a guarantee for
any specific product features and shall not establish a legally
valid contractual relationship. Agar Cleaning Systems accepts
no tortious or contractual liability for any loss or damages
suffered as a consequence of reliance on the information and
advice contained herein.
End of SDS.