Agar MSDS 2016

434 / 452

ABN 80 004 726 890 | MADE IN AUSTRALIA
VIC 03 9480 3000
NSW 02 9743 6020
SA 08 8293 2020
QLD 07 3274 3438
WA 08 9249 4566
Safety Data Sheet
Issued: July 19, 2012
Page 1 of 3
ULTRASTRIP
1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: ULTRASTRIP
Other Names: None
Manufacturer's Product Code: ULT5, ULT20
Product Use: Floor polish remover.
COMPANY DETAILS
Company: Agar Cleaning Systems Pty. Ltd.
Address: 12-14 Cope Street, Preston, Vic. 3072
Telephone: 03 9480 3000 Facsimile: 03 9480 5100
Web:
Agar SDS are available from this website.
E-mail:
Emergency Telephone Number: 131 126 (Aust wide)
2 HAZARDS IDENTIFICATION
Hazardous according to criteria of Safe Work Australia.
Harmful Xn, Corrosive C
Risks:
Harmful by inhalation, in contact with skin and if
swallowed.
Causes burns.
Safety Directions:
Keep locked up and out of the reach of children.
In case of contact with eyes, rinse immediately with
plenty of water and seek medical advice.
Wear suitable protective clothing, gloves and eye/face
protection.
In case of accident or if you feel unwell, seek medical
advice immediately (show the label where possible).
If swallowed, seek medical advice immediately and
show this container or label.
Ultrastrip becomes non-hazardous at concentrations below 55%
3 COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients:
Chemical Entity: CAS No.: Proportion:
ethanolamine 141-43-5 10 - < 30%
2-butoxy ethanol 111-76-2 10 - < 30%
surfactants non-haz < 10%
aromatic alcohol - < 10%
water 7732-18-5 > 60%
4 FIRST AID MEASURES
Poisons Information Centre: Phone 131 126
Swallowed: If poisoning occurs, contact a doctor or Poisons
Information Centre. If swallowed, do NOT induce vomiting.
Give a glass of water to drink. Rinse mouth with water. Never
give anything by mouth to an unconscious person. Seek
immediate medical assistance.
Eye: Immediately hold the eyes open and wash continuously for
at least 15 minutes with fresh running water. Ensure irrigation
under eyelids by occasionally lifting the upper and lower lids.
Transport to hospital or doctor without delay. Removal of
contact lenses after an eye injury should only be undertaken
by skilled personnel. Seek immediate medical assistance.
Skin: Remove any contaminated clothing and flush area with
water and soap if available. Seek medical attention in the
event of irritation.
Inhaled: If any effects are observed, remove affected person to
fresh air. Lay patient down, keep warm and rested. If
breathing is shallow or has stopped, ensure clear airway and
apply resuscitation. Call a doctor.
5 FIRE FIGHTING MEASURES
Fire/Explosion Hazard: Ultrastrip is not combustible.
Fire Extinguishing media: Water spray or fog. Foam. Dry
chemical powder. Carbon dioxide.
Fire Fighters’ PPE: Wear SCBA and chemical splash suit.
Special fire-fighting procedures: None.
Unusual fire hazards: None
Hazardous products of combustion: Thermal decomposition at
temperatures above 200 deg C or in a large fire may yield
toxic fumes which may cause severe eye, nose, throat and
lung irritation. Use adequate ventilation.
6 ACCIDENTAL RELEASE MEASURES
Clean up all spills immediately. Spills may be slippery. Avoid
contact with skin and eyes. Contain spill and mop up. Place in a
suitable, labelled container for waste disposal.
If spilled on clothing, remove and launder before re-use.
7 HANDLING AND STORAGE
Storage and Transport: Store in a cool, dry place.
Incompatibility (Materials to avoid for purposes of transport,
handling and storage only): None.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards: None assigned for this mixture. Data for
principal ingredients only:
Please turn to page 2.