Agar MSDS 2016

283 / 452

ABN 80 004 726 890 | MADE IN AUSTRALIA
VIC 03 9480 3000
NSW 02 9743 6020
SA 08 8293 2020
QLD 07 3274 3438
WA 08 9249 4566
Safety Data Sheet
Issued: February 19, 2016
Page 1 of 2
NEW POWERQUAT
1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: NEW POWERQUAT SANITISER
Other Names: None
Manufacturer's Product Code: POW5, POW20
Product Use: Sanitiser for killing germs on hard surfaces.
COMPANY DETAILS
Company: Agar Cleaning Systems Pty. Ltd.
Address: 12-14 Cope Street, Preston, Vic. 3072
Telephone: 03 9480 3000 Facsimile: 03 9480 5100
Web:
Agar SDS are available from this website.
E-mail:
Emergency Telephone Number: 131 126 (Aust wide)
2 HAZARDS IDENTIFICATION
Hazardous according to criteria of Safe Work Australia.
Irritant Xi. Not classed as Dangerous Goods.
Risks:
Irritating to eyes and skin. [R36/38]
Safety Directions:
Keep out of the reach of children. [S2]
In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice. [S26]
Wear suitable protective clothing and gloves. [S36/37].
In case of insufficient ventilation, wear suitable
respiratory equipment. [S38]
In case of accident or if you feel unwell, seek medical
advice immediately (show the label where possible).
[S45]
New Powerquat becomes non-hazardous at concentrations
below 50%
3 COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients:
Chemical Entity: CAS No.: Proportion:
Didecyl dimethyl ammonium
Chloride 7173-51-5 < 10%
Isopropanol 67-63-0 < 6%
Water and 7732-18-5 to 100%
Other non-hazardous ingredients
4 FIRST AID MEASURES
Poisons Information Centre: Phone 131 126
If poisoning occurs, contact a doctor or Poisons Information
Centre.
Swallowed: If swallowed, do NOT induce vomiting. Give a glass
of water to drink. Rinse mouth with water. Never give anything
by mouth to an unconscious person.
Eye: Immediately hold the eyes open and wash continuously for
at least 15 minutes with fresh running water. Ensure irrigation
under eyelids by occasionally lifting the upper and lower lids.
Transport to hospital or doctor without delay. Removal of
contact lenses after an eye injury should only be undertaken
by skilled personnel.
Skin: Remove any contaminated clothing and flush area with
water and soap if available. Seek medical attention in the
event of irritation.
Inhaled: This is considered to be unlikely to occur and unlikely
to cause any reactions. However, if any effects are observed,
remove affected person to fresh air. Lay patient down, keep
warm and rested. If breathing is shallow or has stopped,
ensure clear airway and apply resuscitation. Call a doctor.
5 FIRE FIGHTING MEASURES
Fire/Explosion Hazard: New Powerquat is not combustible.
Fire Extinguishing media: Water spray or fog. Foam. Dry
chemical powder. Carbon dioxide.
Special fire-fighting procedures: None.
Unusual fire hazards: None
Hazardous products of combustion: Thermal decomposition at
temperatures above 200 deg C or in a large fire may yield
toxic fumes which may cause severe eye, nose, throat and
lung irritation. Use adequate ventilation.
6 ACCIDENTAL RELEASE MEASURES
Clean up all spills immediately. Spills may be slippery. Avoid
contact with skin and eyes. Contain spill and mop up. Place in a
suitable, labelled container for waste disposal.
If spilled on clothing, remove and launder before re-use.
7 HANDLING AND STORAGE
Storage and Transport: Store in a cool, dry place.
Stability: Stable.
Incompatibility (Materials to avoid for purposes of transport,
handling and storage only): None.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards: None assigned for this mixture or
ingredients.
Engineering Controls: Mechanical ventilation: not required under
normal conditions.
Personal Protection:
Gloves - Wear rubber gloves if prolonged skin contact is
anticipated.
Eye protection – Safety glasses to be worn when using
undiluted New Powerquat.
Respiratory – Not needed.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: Colourless liquid
Odour: Mild
pH = 6.8 – 7.8
Vapour Pressure: N/K
Please turn to page 2.