Agar MSDS 2016

23 / 452

ABN 80 004 726 890 | MADE IN AUSTRALIA
VIC 03 9480 3000
NSW 02 9743 6020
SA 08 8293 2020
QLD 07 3274 3438
WA 08 9249 4566
Safety Data Sheet
Issued: January 6, 2016
Page 1 of 2
AMMODET
1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: AMMODET DETERGENT
Other Names: None
Manufacturer's Product Code: AMM5, AMM20
Product Use: Detergent for windows and hard surfaces.
COMPANY DETAILS
Company: Agar Cleaning Systems Pty. Ltd.
Address: 12-14 Cope Street, Preston, Vic. 3072
Telephone: 03 9480 3000 Facsimile: 03 9480 5100
Web:
Agar SDS are available from this website.
E-mail:
Emergency Telephone Number: 131 126 (Aust wide)
2 HAZARDS IDENTIFICATION
Hazardous according to criteria of Safe Work Australia.
Irritant Xi. Not classed as Dangerous Goods.
Risks:
Irritating to eyes, respiratory system and skin.
[R36/37/38]
Safety Directions:
Keep out of the reach of children. [S2]
In case of contact with eyes, rinse immediately
with plenty of water and seek medical advice. [S26]
Wear suitable gloves and eye/face protection. [S37]
Ammodet becomes non-hazardous at concentrations below
78%
3 COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients:
Chemical Entity: CAS No.: Proportion:
Surfactants non-haz 10 - < 30%
Ammonia 1336-21-6 < 10%
Water and 7732-18-5
other non-hazardous ingredients to 100%
4 FIRST AID MEASURES
Poisons Information Centre: Phone 131 126
Swallowed: If poisoning occurs, contact a doctor or Poisons
Information Centre. If swallowed, do NOT induce vomiting.
Give a glass of water. Rinse mouth with water. Never give
anything by mouth to an unconscious person.
Eye: Immediately hold the eyes open and wash continuously for
at least 15 minutes with fresh running water. Ensure irrigation
under eyelids by occasionally lifting the upper and lower lids.
Transport to hospital or doctor without delay. Removal of
contact lenses after an eye injury should only be undertaken
by skilled personnel.
Skin: Remove any contaminated clothing and flush area with
water. Seek medical attention in the event of irritation.
Inhaled: Remove affected person to fresh air. Lay patient down.
Keep warm and rested. If breathing is shallow or has stopped,
ensure clear airway and apply resuscitation. Transport to
doctor or hospital.
5 FIRE FIGHTING MEASURES
Fire/Explosion Hazard: Ammodet is not combustible.
Fire Extinguishing media: Water spray or fog. Foam. Dry
chemical powder. Carbon dioxide.
Special fire-fighting procedures: None.
Unusual fire hazards: None
Hazardous products of combustion: Thermal decomposition at
temperatures above 200°C or in a large fires may yield toxic
fumes. Use adequate ventilation.
6 ACCIDENTAL RELEASE MEASURES
Clean up all spills immediately. Spills may be slippery. Avoid
contact with skin and eyes. Contain spill and mop up. Place in a
suitable, labelled container for waste disposal.
If spilled on clothing, remove and launder before re-use.
7 HANDLING AND STORAGE
Storage and Transport: Store in a cool, dry place away from
foodstuff containers. Keep container tightly closed.
Stability: Stable.
Incompatibility (Materials to avoid for purposes of transport,
handling and storage only): Avoid storage with strong acids.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards: None assigned for this mixture. Data for
principal ingredients only :
Atmospheric Contaminant Exposure Standard for:
Ammonia: CAS No. 7664-41-7
TWA = 25ppm (17mg/cu.m)
STEL = 35ppm (24mg/cu.m)
[Source: Safe Work Australia HSIS 2016]
Engineering Controls: Ventilation: Use with adequate ventilation.
Avoid breathing vapour of product.
Mechanical ventilation: Not required under normal conditions,
but local exhaust ventilation should be used to control any air
contaminants to within the Exposure Standards.
Personal Protection: Avoid contact with skin and eyes.
Gloves - Wear rubber gloves if prolonged skin contact is
anticipated.
Eye protection – Safety glasses to be worn if there is a risk or
splashing.
Respiratory – Wear an appropriate safety mask if exposed to
concentrated vapour from product.
Please turn to page 2.