Agar MSDS 2016

158 / 452

ABN 80 004 726 890 | MADE IN AUSTRALIA
VIC 03 9480 3000
NSW 02 9743 6020
SA 08 8293 2020
QLD 07 3274 3438
WA 08 9249 4566
Safety Data Sheet
Issued: October 21, 2011
Page 1 of 2
FLAIR LAUNDRY POWDER
1 IDENTIFICATION OF THE MATERIAL AND SUPPLIER
Product Name: FLAIR LAUNDRY POWDER
Other Names: None.
Manufacturer's Product Code: FLA5, FLA15, FLA25
Product Use: Detergent for washing clothes.
COMPANY DETAILS
Company: Agar Cleaning Systems Pty. Ltd.
Address: 12-14 Cope Street, Preston, Vic. 3072
Telephone: 03 9480 3000 Facsimile: 03 9480 5100
Web:
Agar SDS are available from this website.
E-mail:
Emergency Telephone Number: 131 126 (Aust wide)
2 HAZARDS IDENTIFICATION
Hazardous according to criteria of Safe Work Australia.
Irritant Xi
R36/38 Irritating eyes and skin.
S1/2 Keep locked up and out of the reach of children.
S13 Keep away from food, drink and animal feeding
stuffs.
S24/25 Avoid contact with skin and eyes.
S36/37/38 Wear suitable protective clothing, gloves and
eye/face protection.
S45 In case of accident or if you feel unwell, seek
medical advice immediately (show the label where
possible).
Flair becomes non-hazardous at concentrations below 30%
3 COMPOSITION / INFORMATION ON INGREDIENTS
Ingredients:
Chemical Entity: CAS No.: Proportion:
Sodium carbonate 497-19-8 10 - < 30%
Surfactants 68131-39-5 10 - < 30%
Sodium metasilicate 6834-92-0 < 10%
Sodium compounds non-haz < 10%
Optical brightener non-haz < 10%
Perfume non-haz < 10%
Subtilisins 9014-01-1 < 1%
Other non-hazardous ingredients to 100%
4 FIRST AID MEASURES
Poisons Information Centre: Phone 131 126
Swallowed: If poisoning occurs, contact a doctor or Poisons
Information Centre. If swallowed, do NOT induce vomiting.
Give a glass of water to drink. Rinse mouth with water. Never
give anything by mouth to an unconscious person.
Eye: Immediately hold the eyes open and wash continuously for
at least 15 minutes with fresh running water. Ensure irrigation
under eyelids by occasionally lifting the upper and lower lids.
Transport to hospital or doctor without delay. Removal of
contact lenses after an eye injury should only be undertaken
by skilled personnel.
Skin: Remove any contaminated clothing and flush area with
water and soap if available. Seek medical attention in the
event of irritation.
Inhaled: Blow nose, clean nostrils with moist cotton wool. If any
effects are observed, remove affected person to fresh air. Lay
patient down. Keep warm and rested. If breathing is shallow or
has stopped, ensure clear airway and apply resuscitation. Call
a doctor.
5 FIRE FIGHTING MEASURES
Fire/Explosion Hazard: Flair is not combustible.
Fire Extinguishing media: Water spray or fog. Foam. Dry
chemical powder. Carbon dioxide.
Special fire-fighting procedures: None.
Unusual fire hazards: None.
Hazardous products of combustion: Thermal decomposition at
temperatures above 200 deg C or in a large fire may yield
toxic fumes. Use adequate ventilation.
6 ACCIDENTAL RELEASE MEASURES
Clean up all spills immediately. Spills may be slippery. Avoid
contact with skin and eyes. Contain spill and mop up. Place in a
suitable, labelled container for waste disposal.
If spilled on clothing, remove and launder before re-use.
7 HANDLING AND STORAGE
Storage and Transport: Store in a cool, dry place.
Incompatibility (Materials to avoid for purposes of transport,
handling and storage only): None.
8 EXPOSURE CONTROLS / PERSONAL PROTECTION
Exposure Standards: None assigned for mixture or ingredients.
Engineering Controls: Mechanical ventilation: Not required
under normal conditions.
Personal Protection:
Gloves - Wear rubber gloves if skin contact is anticipated.
Eye-protection - Safety glasses.
Respiratory – Not needed normally. Use dust-mask if dust is
being generated.
9 PHYSICAL AND CHEMICAL PROPERTIES
Appearance: White powder
Odour: Pleasant perfume
pH = 11 – 12 (as 1% solution)
Vapour Pressure: N/A
Vapour Density: N/A
Boiling Point: N/A
Freezing Point: < 0°C
Solubility in water: Soluble
Please turn to page 2.